HBS-200® Accelerator

Bottle 1 L

Accelerates HBS-200® Top layer drying process

HBS-200® Accelerator

Description

Properties

Accelerator does not affect the technical properties of HBS-200® Liquid Rubber and HBS-200® Rubber Tix.

Go to top

Applications

Suitable for:

To use on HBS-200® Liquid Rubber and HBS-200® Rubber Tix.

Go to top

Handling

Before use:

Working conditions

Use at temperatures between +5°C and +35°C.

Personal safety

Wear eye protection and wash hands thoroughly after handling.

Tools

HBS-200® Acccelerator 5 liters jerry can can be sprayed using a pressure sprayer.

During use:

Directions for use

Spray Accelerator on the HBS-200® coating. HBS-200® is dry-to-touch 2 minutes after using Accelerator, can withstand light rain after 5 minutes, and is completely impervious to rainfall and water after 10 minutes. Make sure that HBS-200® is completely dry before applying a new HBS-200® layer. Use water to clean tools afterwards.

Points of attention

  • Risk of corrosion: there is a risk of corrosion on untreated steel and iron.
  • Use on non-porous surfaces: when using HBS-200® in combination with Accelerator, we recommend applying several thin layers (of approx. 1.0 mm) of HBS-200® Rubber coating. When applying thicker layers, the final curing of the coating in combination with HBS-200® Accelerator can be delayed.

After use:

Storage conditions

Properly sealed packages should be stored in a dry, cool, frost-proof, ventilated location at temperatures between +5°C and +25°C.

Go to top