Suitable for mounting signs, mirror panels or safety instructions onto various surfaces in pool surroundings and bonding insulation panels or ceiling elements to concrete, brick, or wood in pool technical areas. Can also be used for fixing protective & decorative panels around pool zones. Bonds to glass, stone, natural stone, concrete, plasterwork, many synthetic materials, wood, chipboard, Trespa®, iron, aluminum, zinc, steel, stainless steel and other metals, ceramic tiles, cork and mirrors.

Not suitable for load-bearing constructions and not suitable for PE, PP, PTFE and bitumen. When gluing plastics always perform an adhesion test first. Adhesion to plastics can vary depending on the type of synthetic and the quality of the plastic.

Only apply at temperatures between +5 °C and +40 °C.

Surfaces must be clean, dust- and grease-free. Surface must be solid. The surface may be slightly moist. Use of primer not required.

Cartridge Gun, Sharp Knife or Griffon Multi Tool, if necessary, use a rubber mallet to tap lightly.

Before using open cartridge at the top by cutting off the plastic nipple above the thread and fix the nozzle onto the cartridge.

Stripes: one cartridge issues approx. 8-15 metres of adhesive (depending on the diameter of the cut nozzle).

Depending on the weight of the material, apply the adhesive evenly in vertical strips or dots at intervals of between 10 and 40 cm. Always apply adhesive to the corners and along the edges. Mutual moving of materials (facade panels) can be accommodated through an adhesive thickness of 3 mm (use spacer blocks, or tape). Assemble materials with a sliding movement and press or hammer firmly together. Correction is still possible within 10 minutes. If necessary, clamp or fixate heavy materials for 4 hours. Can be handled after 30 minutes (the connection is now strong enough to withstand transportation or a light load), maximum final strength after approx. 4 hours, depending on the surface and the ambient conditions. Fully cured after a few days (depending on the thickness of the layer). When painting over with alkyd paint, the paint may dry more slowly. Close the cartridge properly immediately after use.

The following drying times are based on bonding at least one porous material and an adhesive layer of approx. 1 mm thickness. If two non-porous materials are being bonded and/or the layer of adhesive is thicker, the drying times may be substantially longer.

Use white spirit for cleaning tools and removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.

Close cartridge properly and store in a dry, cool and frost-free place. Once opened shelf life is limited, unopened shelf life is 18 months.