Suitable for concrete and segment pools only.

Determine whether the leak is in the pipes, overflow, or the pool itself.

Submersible pump

Turn off the pool's circulation pump and filter. Thoroughly shake the jerrycan to ensure the fibers are well mixed.

Mixing Ratio: 1:1.000 = 1 liter Leak Sealer to 1.000 liters of swimming pool water.

1. Add the appropriate amount of Leak Sealer to the pool, using a mixing ratio of 1 liter of Leak Sealer to 1.000 liters of pool water. Ensure all fibers from the canister are added to the pool. If fibers remain in the canister, fill it halfway with pool water and shake again before pouring into the pool. 2.Create circulation without the use of filtration by placing a submersible pump in the pool and run this circulation for 1 to 3 days until the leak is sealed. 3. Maintain the water in the pool and filter out the fibers. Adjust the pH level of the pool water if necessary, using pH-minus, or drain the pool to clean any remaining product residues from surfaces and tiles.

Do not use if the water hardness exceeds 25° DH (German hardness). Pools may develop new leaks if affected by seismic activity or foundation movements.

Pool Leak Sealer is only effective on hard-walled concrete or segment pools. Immediately rinse off any spilled product from surfaces outside the pool with water to prevent staining, which cannot be removed.

Immediately rinse off any spilled product from surfaces outside the pool with water to prevent staining which cannot be removed.

Store in a dry, frost-free place between +5°C and +25°C. The shelf life is 5 years. Best Before Date (MM/YY).