Epoxy Repair Stick

Stick 114 g (Tear-off box)

Dual-component Epoxy Stick

Epoxy Repair Stick

Description

Properties

  • Very fast curing
  • Easy to process without tools
  • No shrinkage
  • Also bonds to moist surfaces.
  • Can be used internally and externally
  • Grinding, drilling, sawing possible after curing
  • Paintable
  • Chemical resistant
  • Water resistant
Go to top

Applications

Suitable for:

Suitable for repairing and sealing leaks, holes and cracks in, e.g., piping, radiators, boilers, drains, air ducts, gutters and storage tanks. Bonds, among other things to steel, copper, aluminium, iron, zinc, PVC, wood, synthetics, ceramics, tiles, pottery and concrete.

Go to top

Handling

Before use:

Working conditions

Only apply at temperatures between +15°C and +25°C.

Personal safety

Wear gloves.

Surface requirements

The substrate must be thoroughly clean and free of grease.

Preliminary surface treatment

Roughen smooth surfaces first.

During use:

Directions for use

Cut the required amount and replace foil. Knead very thoroughly (at least 1 minute!) into a homogeneous grey mass. Apply within 2 minutes after kneading. Press product firmly until curing is noticeable. Remove excess product with a damp (putty) knife. Within 5-10 minutes curing is noticeable. After full curing (30 minutes) drilling, sawing, sanding and painting is possible. After use, wash hands immediately and thoroughly with soap and water.

Points of attention

Fingerprints can be removed before curing by rubbing with water or a damp cloth.

After use:

Storage conditions

Store in properly sealed packaging in a dry place at between +5°C and +25°C.

Go to top