- Very high initial bond strength
- Permanently elastic
- Very good filling capacity
- Good standing power
- Non-shrinking; 100% adhesive
- No soiling of joint edges
- All-weather resistant
- Resistant to temperatures between -40°C and +100°C
- Curing ca. 2 mm/24 hours
- For bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam and various plastics.
- Suitable for internal and external applications, such as panels, ceiling elements, roof fascias, panelling and insulation material, mirrors, timber framework, skirting boards and laths.
- For all professional applications including wall and interior construction, house, utility and bodywork building.
The ambient temperature, the adhesive and the materials to be bonded should be no less than +5°C.
Preliminary surface treatment
Surfaces must be clean, dust- and grease-free. Surface must be solid. The surface may be slightly moist. Use of primer not required.
Cartridge gun and rubber hammer.
Handling of packaging
Only apply with special nozzle supplied.
Directions for use
Cut the thread and assemble the nozzle. Depending on the weight of the material, apply the adhesive evenly in vertical strips or dots at intervals of between 10 and 40 cm. Always apply adhesive to the corners and along the edges. Mutual moving of materials (facade panels) can be accommodated through an adhesive thickness of 3 mm (use spacer blocks, or tape). Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible. Close the cartridge properly immediately after use.
Remove adhesive residues immediately with white spirit. Dry adhesive residue can only be removed mechanically.
Store dry in sealed packaging between +5°C and +25°C.