For waterproofing of cracks in roofs (repair), dome windows, pipe transits and other building components. For horizontal and vertical applications and suitable for sealing and protecting a wide variety of materials, such as concrete, metal, stone, wood, zinc, PVC, EPDM (always test in advance). Excellent for both interior and exterior applications (basements, terraces, balconies & roofs) including gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints and ground level items. Also suitable as a waterproof layer in damp environments such as bathrooms and swimming pools. Perfect for airtight sealing of the building envelope from the outside and inside. Meets airtightness requirements according to EN 12114 and EN 1026.

Only use above +5°C.

SMP-300® can be applied on moist surfaces, however avoid puddles of water. New concrete structures need to dry for at least 28 days.

Remove loose cement and dirt with a hand brush and make the surface free of dust. Surfaces must be dry, clean and free of dust and grease.

Cartridge gun, GRIFFON Wipes

Do not dilute.

± 5 m at Ø 10 mm

Apply the coating with a cartridge gun, spread out preferably within 20 - 30 minutes using a spatula or similar tool.

Always ensure a layer thickness of at least 1.5 mm (Waterproofing) and 1.0 mm (Airtight Constructions) after curing (wet=dry). For large gaps, connecting joints or seams in for example partition walls suitable back padding is essential. Then first use Griffon HBS-200® Flex Foam. Can be painted after full curing with both acrylic and alkyd paints. The curing time may be longer with alkyd paints. Always test in advance. The adhesion of stucco and tile adhesive to the coating can be improved by surface-enhancing quartz primer (Primer for non-absorbent surfaces).

Coating can withstand light rain after 30 minutes and heavy rain after 50 – 60 minutes. Completely waterproof after 12 hours, depending on relative humidity, temperature and surface. Take into account longer curing times at lower temperatures and lower humid weather conditions. Can be applied on bitumen treated with slate. Do not use coating on untreated or raw bitumen roofs as the coating can discolor or detach in time. Applied coating may deteriorate prematurely if minimum required layer thickness is not used. If a joint sealant is used in combination with SMP-300® coating, we strongly recommend to use a neutral silicone or SMP sealant, for example Griffon S-200 or Poly Max® Fix & Seal, to prevent discoloration of the sealant. Not suitable for PE, PP and PTFE.

Uncured residues can be cleaned by using GRIFFON Wipes or Thinner. Cured residues can only be removed mechanically.

Properly sealed cartridge should be stored in a dry, cool location at temperatures between +5 °C and +25 °C. Shelf life: At least 15 months in unopened package. Opened packaging reduces the shelf life.