HBS-200® Accelerator
- Accelerator does not affect the technical properties of HBS-200® Liquid Rubber and HBS-200® Rubber Tix.
Properties
- Accelerator does not affect the technical properties of HBS-200® Liquid Rubber and HBS-200® Rubber Tix.
Application
To use on HBS-200® Liquid Rubber and HBS-200® Rubber Tix.
Handling
Before use
Use at temperatures between +5°C and +35°C.
HBS-200® Acccelerator 5 liters jerry can can be sprayed using a pressure sprayer.
15 m2
During use
Spray Accelerator on the HBS-200® coating. HBS-200® is dry-to-touch 2 minutes after using Accelerator, can withstand light rain after 5 minutes, and is completely impervious to rainfall and water after 10 minutes. Make sure that HBS-200® is completely dry before applying a new HBS-200® layer. Use water to clean tools afterwards.
Risk of corrosion: there is a risk of corrosion on untreated steel and iron. Use on non-porous surfaces: when using HBS-200® in combination with Accelerator, we recommend applying several thin layers (of approx. 1.0 mm) of HBS-200® Rubber coating. When applying thicker layers, the final curing of the coating in combination with HBS-200® Accelerator can be delayed.
Wear eye protection and wash hands thoroughly after handling.
After use
Properly sealed packages should be stored in a dry, cool, frost-proof, ventilated location at temperatures between +5°C and +25°C.