Aerosol 750 ml

Fast curing polyurethane foam




  • Non-shrinking
  • Large filling capacity
  • High insulation value
  • Flammability class B2
  • Paintable
  • Water resistant
  • Chemical resistant
  • CFC and HCFC-free (ozone friendly)


  • 48_1.png
Go to top


Suitable for:

Suitable for insulating, sealing and filling of seams, joints, gaps, holes and cracks in wall partitions, window and door frames, roof boards, chimneys, dormers and penetrations of pipes, tubes, cables and power lines. Bonds to many building materials, such as wood, concrete, stone, masonry, plasterwork, metal, glass and many synthetics, including polystyrene, polyester and PVC.

Not suitable for:

Not suitable for bitumen, silicone, polyethylene (PE), polypropylene (PP) and P.T.F.E.

Go to top


Before use:

Working conditions

Only apply at temperatures between +5°C and +40°C.

Personal safety

Wear gloves and safety goggles and provide adequate ventilation.

Surface requirements

The substrate must be thoroughly clean and free of grease. Slightly moisten dry surfaces.

Preparation of product

Shake well before use (10-20 times).

During use:

Directions for use

Shake well before use (10-20 times). Hold the can upside down while spraying. Fill the area for about 50%. For filling large volumes apply foam in layers and allow to fully froth. Moisten between each layer. After curing, the foam can be cut, drilled and painted, and, if desired, plastered.

After use:


Remove wet stains immediately with GRIFFON PU-Foam Cleaner or acetone. Cured stains can only be removed mechanically.

Storage conditions

Store upright in properly sealed packaging in a dry place between +5°C and +25°C.

Go to top

Related products

Go to top