Suitable for repairing and sealing leaks, holes and cracks in, e.g., piping, radiators, boilers, drains, air ducts, gutters and storage tanks. Bonds, among other things to steel, copper, aluminium, iron, zinc, PVC, wood, synthetics, ceramics, tiles, pottery and concrete.

Not suitable for polyethylene (PE), polypropylene (PP), PTFE and bitumen.

Only apply at temperatures between +15°C and +25°C.

The substrate must be thoroughly clean and free of grease.

Roughen smooth surfaces first.

Cut the required amount and replace foil. Knead very thoroughly (at least 1 minute!) into a homogeneous grey mass. Apply within 2 minutes after kneading. Press product firmly until curing is noticeable. Remove excess product with a damp (putty) knife. Within 5-10 minutes curing is noticeable. After full curing (30 minutes) drilling, sawing, sanding and painting is possible. After use, wash hands immediately and thoroughly with soap and water.

Fingerprints can be removed before curing by rubbing with water or a damp cloth.

Wear gloves.

Store in properly sealed packaging in a dry place at between +5°C and +25°C.