- Very fast curing
- Easy to process without tools
- No shrinkage
- Also bonds to moist surfaces.
- Can be used internally and externally
- Grinding, drilling, sawing possible after curing
- Chemical resistant
- Water resistant
Suitable for repairing and sealing leaks, holes and cracks in, e.g., piping, radiators, boilers, drains, air ducts, gutters and storage tanks. Bonds, among other things to steel, copper, aluminium, iron, zinc, PVC, wood, synthetics, ceramics, tiles, pottery and concrete.
Not suitable for:
Not suitable for polyethylene (PE), polypropylene (PP), PTFE and bitumen.
Only apply at temperatures between +15°C and +25°C.
The substrate must be thoroughly clean and free of grease.
Preliminary surface treatment
Roughen smooth surfaces first.
Directions for use
Cut the required amount and replace foil. Knead very thoroughly (at least 1 minute!) into a homogeneous grey mass. Apply within 2 minutes after kneading. Press product firmly until curing is noticeable. Remove excess product with a damp (putty) knife. Within 5-10 minutes curing is noticeable. After full curing (30 minutes) drilling, sawing, sanding and painting is possible. After use, wash hands immediately and thoroughly with soap and water.
Points of attention
Fingerprints can be removed before curing by rubbing with water or a damp cloth.
Store in properly sealed packaging in a dry place at between +5°C and +25°C.