Skip to content

FlexFoam-200

EAN: 8710439265773Article No.: 6312873
Professional and permanently elastic single-component gun foam based on polyurethane. Ideal for making airtight seals, optionally in combination with other PU FOAMS, Griffon PU-Flexfoam 200, EMICODE: Classification system (GEV) of emission properties for construction products in indoor areas. EC-1 Plus (Very low emission Plus), Thermal performance of buildings - Air permeability of building components and building elements: completely airtight, Windows and doors - Air permeability: completely airtight. HBS-200® products. Quick and easy application with the PU FOAMS, Griffon PU-Flexfoam 200, EMICODE: Classification system (GEV) of emission properties for construction products in indoor areas. EC-1 Plus (Very low emission Plus), Thermal performance of buildings - Air permeability of building components and building elements: completely airtight, Windows and doors - Air permeability: completely airtight. PU Foam Gun. Because the foam remains flexible, it is easy to make permanent, insulated seals between two (significantly) moving surfaces.
  • Airtight, tested to 1,050 Pa
  • Remains elastic (25%)
  • Excellent sound insulation
  • Low subsequent expansion, minimum cutting loss
  • Paint and stucco finishing
  • Water resistant
  • Resistant to chemicals
  • Temperature resistant from -40°C to +90°C
  • ± 70% closed cells

Properties

  • Airtight, tested to 1,050 Pa
  • Remains elastic (25%)
  • Excellent sound insulation
  • Low subsequent expansion, minimum cutting loss
  • Paint and stucco finishing
  • Water resistant
  • Resistant to chemicals
  • Temperature resistant from -40°C to +90°C
  • ± 70% closed cells

Application

Suitable for:

Suitable for sealing and insulating, as well as filling seams, pointing, holes, cracks and gaps and making joints to prevent air and heat loss, draughts, noise and damp. This includes joints between partition walls and ceilings, between walls, clearance spaces between window or door frames and the wall, ridge seams, roof decking, chimneys and roof panels, pipe ducts, sleeving, cables and electrical conduits. Adheres to many building materials including wood, concrete, stone, brickwork, plasterwork, metals, glass and many plastics including polystyrene, polyester and PVC.

Not suitable for:

Not suitable for polyethylene, polypropylene, polymethyl methacrylate and polytetrafluoroethylene.

Handling

Before use

Working conditions

Working temperature between +5°C and +35°C.

Surface requirements

Surfaces should be free of dust and grease. Preferably, slightly moisten the surfaces.

Tools

GRIFFON PU Foam Gun.

Preparation of product

Shake well before use (at least 20 times).

Coverage

750 ml yields 30 - 35 liter cured foam

During use

Directions For Use

Load the canister onto a GRIFFON PU Foam Gun. Keep the canister upside down when using. Do not fill spaces more than half full. Fill large spaces with the foam layer by layer. Moistening the foam will result in faster curing times. Tack-free after approximately 8 minutes and cuttable after approximately 30 minutes. Total curing period approximately 1.5 hours, depending on thickness and ambient conditions. Can be cut, sawn, sanded and painted after curing.

Personal Safety

When applying, always wear protective gloves, safety goggles and overalls.

After use

Stains/residue

Immediately remove spots and splashes with GRIFFON PU-Foam Cleaner. Remove any cured foam mechanically.

Storage conditions

Store UPRIGHT in a cool, dry place to prevent the valve from gluing up.

Documents

Approval marks & standards

Similar products