Sealant Finishing Set
- Set of 4 tools made of thermoplastic rubber Multi functional: for round joints, 45° & 90° joints and flat joints Easy to clean – sealant residues removed easy
Properties
- Set of 4 tools made of thermoplastic rubber
- Multi functional: for round joints, 45° & 90° joints and flat joints
- Easy to clean – sealant residues removed easy
Application
Ideal for smoothening Acrylic, Silicone, PU- and Polymer sealants. In addition, The GRIFFON Sealant Finishing Set can also be used for smoothening epoxy coatings and for glass applications, such as an aquarium or renewing the sealant of a window frame. The 4 piece set can be used for the following joints: - 45° joints in widths: 3 mm, 5 mm, 6 mm, 8 mm, 10 mm and 14 mm - Round joints in widths: 2 mm, 4 mm, 6 mm, 8 mm, 14 mm and 20 mm - Straight 90° joints - Flat joints.
Handling
Before use
GRIFFON Sealant Finisher, GRIFFON Wipes
During use
Spray GRIFFON Sealant Finisher or an acid-free soap-water solution over the applied sealant joint. Moisten the flat side of the GRIFFON Sealant Finishing Tool with GRIFFON Sealant Finisher. Place the flat side of the tool with the exact joint width dimension onto the joint and smoothen the sealant by pulling the Finishing Tool towards you. Note: keep the tool tight against the substrate and the wall. Wipe off the excess sealant on a cloth. Let the sealant cure according to the instructions of the respective sealant.
· Check beforehand if the joint width is the same over its entire length. · Smooth horizontal joints in sanitary areas at a 45-degree angle to allow water to drain properly. This prevents dirt and soap residue from being left behind, which can cause mould. · The Sealant Finishing Tool is easy to clean with a damp cloth or GRIFFON Wipes. · Use the small diameter of the Sealant Finishing Tool to remove excess sealant between the tile joints.