DescriptionGo to top
Suitable for repairs to masonry and concrete. Suitable for, e.g., mounting work, fixing bolts, hooks and screws, repairing leaks in masonry and concrete.
Use only at temperatures between +5°C and +25°C.
Wear gloves and safety goggles.
The substrate must be solid, clean and free of grease. Remove loose parts.
Preliminary surface treatment
Slightly moisten dry surfaces.
Float, trowel, putty knife.
Directions for use
Mix 3 parts rapid cement with 1 part of water to form a solid homogeneous paste. Apply paste immediately (within one minute) with a float, trowel or putty knife. Properly close the container immediately after use.
Points of attention
At low temperatures, the curing can be accelerated by using warm or hot water. For larger repairs make a mixture of GRIFFON rapid cement, water and fine sand.
Remove wet rapid cement residue immediately with water. Cured rapid cement residue can only be removed mechanically.
Store in properly sealed packaging in a dry place at between +5°C and +25°C.