RPS-300
- Restores original colour of faded and discoloured/weathered plastics (PVC/ABS/PE/etc.) and coated metal, for example window frames, sidings and paneling, garage doors, shutters, boats and caravans.
- Enhances appearance of natural stone and tiles such as window sills, floors and terraces.
Properties
- Restores original colour of faded and discoloured/weathered plastics (PVC/ABS/PE/etc.) and coated metal, for example window frames, sidings and paneling, garage doors, shutters, boats and caravans.
- Enhances appearance of natural stone and tiles such as window sills, floors and terraces.
Application
For discoloured/weathered plastics (PVC/ABS/PE/etc.), coated metal untreated and natural stone.
Not suitable for restoring the original colour of white colored plastics and not applicable on porcelain tiles and car paint.
Handling
Before use
Use at temperatures between +5°C and +35°C.
Mask windows and glass to prevent staining on the glass. Also, do not touch the glass with used gloves.
Do not dilute.
500ml of RPS-300® is sufficient for approximately 10 m² of coated metal and plastics. Actual consumption depends on porousness of the surface and application method.
During use
Clean the surface and remove dirt, grease and moisture. Apply coating with a clean lint-free cloth in an even, thin layer. High gloss finish on natural stones can be achieved by applying an additional coat after the first coat has dried. For a matte finish, apply 1 layer and wipe the treated surface with a clean cloth after 1 hour. In case of natural stone with a very rough surface, application by (paint) brush is recommended. The product is cured within 24 hours.
· Treating a small trial area in a non-visible place is recommended to ensure if the desired appearance is achieved.
Wear protective gloves and eye protection.
After use
Remove spilled coating directly with help of a lint-free cloth.
Store in properly sealed packaging in a dry, cool, frost-free location (+5°C and +25°C).