DescriptionGo to top
Suitable for sealing seams, joints and gaps and repairing cracks in (open) fireplaces, multi-burners, stoves and chimneys. Bonds to metal, stone, brick and concrete.
Only apply at temperatures between +5°C and +40°C.
Remove any existing sealant residue.
Preliminary surface treatment
Degrease metals with degreaser. Slightly moisten porous surfaces.
Sealant smoother, Putty knife
Directions for use
- Apply sealant directly into the joint and then immediately smooth it over using a wet finger, putty knife or sealant smoother.
- Properly close the container immediately after use.
Points of attention
Exposure to heat before it is completely cured may cause the sealant to crack and fragment.
Remove wet stains immediately with water. Cured sealant residue can only be removed mechanically.
Store in well-sealed packaging in a cool, dry and frost free place.