Skip to content

Constru Max Express

EAN: 8710439292403Article No.: 6315193
Very strong, fast, waterproof (D4, according to standard EN 204) and flling construction adhesivebased on SMP-Polymer. Does not contain MDI (Methylenediphenyl diisocyanate). For indoor andoutdoor applications. Does not cause black stains.

Application

Suitable for:

For mounting many building materials such as wood, plaster, (natural) stone, (gas) concrete, metal, rigid foam, various plastics, sheet and insulation materials, roof plates and cover profiles.

Not suitable for:

Not suitable for PE, PP en (PA) (nylon).

Handling

Before use

Working conditions

The ambient temperature, the adhesive and the materials to be bonded should not be less than +5°C.

Surface requirements

Surfaces must be clean, dust- and grease-free. Degrease oily materials with Griffon Cleaner. Roughen non-porous materials.

Preliminary surface treatment

Surfaces must be clean, dust- and grease-free. Degrease oily materials with Griffon Cleaner. Roughen non-porous materials.

During use

Directions For Use

Apply the adhesive evenly directly from cartridge on both sides (for the best result) with a sealant gun. Where needed spread further with glue spreader. Ensure adequate layer thickness. Assemble joint within 5 minutes and fixate for at least 30 min. No pressing. If clamped, use a limited pressure to avoid too much adhesive to be pushed out of the bond.

After use

Stains/residue

Remove wet adhesive residue immediately with Griffon Cleaner. Dry adhesive residue can only be removed mechanically.

Storage conditions

Store in properly sealed packaging in a dry place at between +5°C and +25°C.

Documents

Similar products