Description
Properties
- Paintable
- Easy to tool
- Colourfast
- All-weather resistant
- Resistant to cleaning agents
- With resealable spout
APPROVALS
Applications
Suitable for:
Suitable for sealing seams, joints and gaps in, e.g., partitions, walls, ceilings, window frames, window sills, stairs and skirting boards. Bonds, among other things, to plasterwork, drywall, (cellular) concrete, bricks, masonry, wood, glass, metal and synthetics.
Handling
Before use:
Working conditions
Only apply at temperatures between +5°C and +40°C.
Surface requirements
The surface must be dry, clean and free of dust, rust and grease.
Preliminary surface treatment
For a better adhesion on porous (highly porous) substrates, they should be first covered with a diluted acrylic solution (1 part sealant to 2 parts water). For a good result, cover the joint’s edges with masking tape. Ensure a minimum joint width of 6 mm. Up to a joint width of 12 mm, ensure a joint depth of 6 mm. In case of wider joint widths, the joint depth should be half the joint width. Remove masking tape immediately after tooling.
Tools
Sealant gun, Sealant smoother
During use:
Handling of packaging
Cut off the nipple at the screw thread, assemble nozzle and cut at an angle to the desired joint width.
Directions for use
Apply sealant evenly up to the bottom of the joint and then smooth within 5 minutes using a wet finger, putty knife or sealant smoother. Close the cartridge properly immediately after use.
After use:
Stains/residue
Remove wet stains immediately with water. Cured sealant residue can only be removed mechanically.
Storage conditions
Store in well-sealed packaging in a cool, dry and frost free place.
