DescriptionGo to top
For gluing and assembling practically all materials, such as wood, chipboard, MDF, rubber, metal, glass, ceramics and many synthetics. For square and mitred connections, as found in ornamental and light frames, alcoves, skirting boards and finishing strips. Ideal for quick finish of kitchens, floors, walls, furniture and ceilings.
Do not use in temperatures ≤ +10°C.
Preliminary surface treatment
Parts need to be clean, dry, free of grease and well fitting. Degrease with Griffon Cleaner or acetone. Metals should be lightly sanded.
Directions for use
Spray one of the parts with activator (approx. 15 cm) and allow it to evaporate completely. Immediately apply a thin layer of adhesive to the other part and subsequently assemble both parts. Firmly press them together for 10 seconds. Clean the nozzle of the glue bottle well after use. Be careful! Activator may damage lacquer coat and synthetics. First test on a concealed area.
Points of attention
Caution: instant glue contains cyanoacrylate Dangerous: sticks skin and eyelids together within seconds. Keep out of reach of children. If contact with the skin has occurred, avoid forced attempts to remove the adhesive. In such cases, the skin will automatically reject the adhesive. Subsequently wash skin with water. If the adhesive has ended up in the eyes, then keep eyelids open, rinse immediately with water and consult a doctor. Separate bonded fingers by soaking them well in water and then rolling a pencil between them.
Remove wet adhesive residue immediately by rubbing with a dry cloth or something Dried adhesive residue is very difficult to remove. Acetone will dissolve the adhesive (very slowly).
Store in a dry, cool and frost free place.