Description
Properties
- Very high final bond strength
- Permanently elastic
- Very good filling capacity
- Good standing power
- Non-shrinking; 100% adhesive
- Solvent-free
- No soiling of joint edges
- All-weather resistant
- Resistant to temperatures between -40°C and +100°C
- Paintable
- Curing ca. 2 mm/24 hours
Applications
Suitable for:
For bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam and various plastics. Suitable for internal and external applications, such as timber framework, skirting boards, laths, window sills and sheet and insulation material. For all professional applications including wall and interior construction, house, utility and bodywork building.
Handling
Before use:
Working conditions
The ambient temperature, the adhesive and the materials to be bonded should be no less than +5°C.
Preliminary surface treatment
Surfaces must be clean, dust- and grease-free. Surface must be solid. The surface may be slightly moist. Use of primer not required.
Tools
Cartridge gun and rubber hammer.
During use:
Directions for use
Cut off screw thread, assemble nozzle and cut to a diameter of at least 0.5 cm. Depending on the weight of the material, apply the adhesive evenly in vertical strips or dots at intervals of between 10 and 40 cm. Always apply adhesive to the corners and along the edges. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible. For heavy materials, fastenings or supports may be required. Close the cartridge properly immediately after use.
After use:
Stains/residue
Remove adhesive residues immediately with white spirit. Dry adhesive residue can only be removed mechanically.
Storage conditions
Store dry in sealed packaging between +5°C and +25°C.