Combi Snel

Double syringe 24 ml (Card)

Transparent, fast, dual-component epoxy adhesive

Combi Snel



  • Fast
  • Strong
  • Transparent
  • Universal
  • Filling
  • Water resistant
  • Chemical resistant
  • Paintable
Go to top


Suitable for:

Ideal for fast, strong and invisible repair of many materials, both together and in combination, such as pottery, porcelain, glass, leather, wood, stone, metal and ceramics.

Go to top


Before use:

Working conditions

Only apply at temperatures between +5°C and +35°C. Product cures by mixing the resin and hardener.

Personal safety

It is recommended that rubber or plastic gloves are worn.

Preliminary surface treatment

Materials must be dry, clean and free of grease. Degrease parts to be bonded with Griffon Cleaner Kit or acetone. Roughen smooth surfaces (sandpaper).

During use:

Directions for use

Remove the spatula from the side of the double syringe, and the closure cap from the handle. Break the seal of the double syringe. Press out an equal amount of both components. Mix these two equal parts well with the synthetic spatula. Apply the mixture, which at room temperature (+20°C) remains toolable for about 5 minutes, as a thin layer on one of the two materials. Assemble the material and keep it in place for 20 minutes. Be careful not to move the parts before the adhesive has cured. After use, clean the nozzle with a cloth and place the special cap in the handle on the double syringe. Resin and hardener must not come into contact with each other unless for usage.

After use:


Remove wet adhesive residue immediately with warm water and soap. Dry adhesive residue can only be removed mechanically.

Storage conditions

Store in a dry, cool and frost free place.

Go to top