Wood Sealer for Large Surfaces

Tin 750 ml White

Fast drying sealant for all types of wood and wood-based materials

Wood Sealer for Large Surfaces



  • High sealing capacity
  • Quick-drying
  • Good filling capacity
  • Single-component
  • Good penetration and bonding
  • Extends the lifespan of wood
  • Universally paintable (after drying)
  • Sprayable
  • Solvent-free; waterborne
  • UV resistant
  • Durably elastic
  • Odourless


  • 48_1.png
Go to top


Suitable for:

For sealing and protecting (large) wooden surfaces against moisture, swelling, delaminating and dry rot, such as sheet materials (warranty sheet, multiplex plywood, plywood and concrete plywood), doors, window frames, thresholds and other woodwork. Can also be used for cross-cut ends and (saw) sides.

Go to top


Before use:

Working conditions

The temperature of the workspace, the sealant and the material should be no less than +15°C. Do not use at temperatures below +15°C and above +35°C. Relative humidity min. 50% and max. 85%.

Preliminary surface treatment

Surface must be dry, clean, free of (sanding) dust and grease. Smooth surfaces must be well sanded. Round straight edges.


Brush, roller, air pistol or airless spray device.

Preparation of product

Stir well before use.


Approx. 10 m²/l by 40 microns dry (one layer).

During use:

Directions for use

Apply evenly with a brush, roller, airless spray (spray pressure 100 bar; nozzle from 0.011 to 0.015 inch) or compressed air gun (spray pressure 2-3 bar, nozzle 1.2-1.4 mm). When finishing with primer and/or top coat a single layer is sufficient, if needed apply a second coat after drying. Close packaging well after use.

Points of attention

When applied to certain types of wood (iroko, cedar) some content substances could slow the drying process, necessitating prior degreasing. Storage of finished product: at least 48 hours in accordance with SKH Directive, section 3.4.4 and in accordance with SGT-standard apply a top coat within maximum six months.

After use:


Remove wet stains immediately with tepid water.

Storage conditions

Store in properly sealed packaging in a dry place at between +5°C and +25°C.

Go to top

Related products

Go to top