For the detection of material defects (crack detection), such as quenching cracks, fatigue cracks, porosities, grinding cracks, welding defects, and other surface defects in metals and non-porous synthetics. Use in combination with the Griffon Primor and Devmor.

Do not use in temperatures ≤ +5°C.

Make sure that the surface is clean, dry, and free of grease.

Shake well before use.

Aerosol 300 ml sufficient for approx. 15 m2

1. Spray surface evenly and thinly with Verimor (from approx 20 cm) and let it penetrate in the surface for 15 minutes. 2. Remove the applied Verimor completely with Primor or water. 3. Spray surface evenly and thinly with Devmor (from approx 20 cm). 4. In case of cracks, they will show up as bright red lines against the white background of the developer after a few minutes. 5. Then remove the developer with Primor.

Stored in unopened packaging between +5°C and +25°C. Close packaging properly after use and store in a dry, cool, and frost-free location.