Soldering Wire Tin/Lead 60/40 Resin Core
EAN: 8710439930619Article No.: 1236163
Soldering Wire Tin/Lead 60/40 Resin Core.
- Tin/Lood 60/40
- Harskern
- Ø 1.5 mm
- Temperatuurbestendig tot 90°C
Properties
- Tin/Lood 60/40
- Harskern
- Ø 1.5 mm
- Temperatuurbestendig tot 90°C
Application
Suitable for:
For soldering of printed circuit boards and electronics, among others. Do not use wire solder with resin core in combination with a flux.
Not suitable for:
Not suitable for drinking water pipes.
Handling
Before use
Tools
Soldering iron or burner, scouring fibre, heat shield, cloth
During use
Directions For Use
1. Assemble joint. Use only well-fitting parts. 2. Heat joint evenly and add tin solder. Allow the solder to melt onto the soldered seam and not in the flame or on the iron. Completely fill soldered seam. 3. Remove flux residue with alcohol. 4. Allow joint to cool in air.
Points of attention
Clean soldering iron regularly with Griffon Soldering Iron Cleaner.
After use
Stains/residue
Remove any remaining flux using acetone.