Suitable for cured silicone and polymer sealant residues. Suitable for ceramic tiles, glass, metal, synthetics, laminated material, aluminum and enamel.

Not suitable for nylon.

Only apply at temperatures between +5°C and +40°C.

GRIFFON Multitool, Sharp box cutter or Glass Scraper, Cleaning Cloth, Sanitary Sponge

Shake closed bottle vigorously for about a minute. Cut old sealant loose with a sharp box cutter/ knife. Use the hook of the GRIFFON Multitool to pull the old sealant out of the joint. Remove as much of the existing sealant as possible. Apply the paste generously onto the old sealant residue. Allow to act for at least 30 minutes. Remove old sealant residues with cleaning cloth, glass scraper or sanitary sponge. If necessary, repeat the treatment. Clean the joint thoroughly with a sponge and water. Degrease the surface with a lint-free cloth and let it dry thoroughly. Afterwards it's ready for a new sealant application.

Test the remover on a non-visible spot as staining may occur on sensitive materials.

May cause staining on porous materials and painted surfaces.

Store in properly sealed packaging in a dry place at between +5°C and +25°C.