Skip to content

Resist-2®

EAN: 8710439930152Article No.: 1236299
Solder Wire Tin/Silver 97/3 Solid.
  • Tin/Silver 97/3 Solid Ø 2.0 mm Resistant to temperatures up to 175°C

Properties

  • Tin/Silver 97/3
  • Solid
  • Ø 2.0 mm
  • Resistant to temperatures up to 175°C

Application

Suitable for:

For soft soldering of copper (drinking) water, central heating and gas pipes to copper or brass fittings. To be used in combination with Griffon S-65® Copper.

Handling

During use

Directions For Use

1. Sand joining surfaces well and clean (bare metal) with Griffon scouring fibre. 2. Apply flux evenly with brush to both joining surfaces. Avoid overuse of the flux. 3. Assemble joint. Use only well-fitting parts. Avoid overheating the flux, as this will hamper the flow of the solder. 4. Heat joint evenly and add tin solder. Allow the solder to melt onto the soldered seam and not in the flame or on the iron. Completely fill soldered seam. 5. Remove flux residue with water or a damp cloth. 6. Allow joint to cool in air.

Points of attention

Use Griffon Heat-Shield to protect walls, tiles, wallpaper, paint and plasterwork, for example.

After use

Stains/residue

Remove any remaining flux using water or a damp cloth.

Documents

Similar products