Skip to content
Griffon logo

Panel Max

EAN: 8710439310985Article No.: 7005079
Mounting adhesive based on hybrid polymer with very high initial adhesion for mounting panels, wall coverings and cladding on almost all surfaces. Ideal for all panels that are not fully bonded, e.g. acoustic panels or decorative panels made of wood, acoustic panels or decorative panels made of wood, HPL, stone, aluminum composite*, EPS, polyurethane or PVC.
  • • HEAVY PANELS • SPECIALTY ADHESIVE • TENSION EQUALIZING • VERY GOOD FILLING CAPACITY • SKIN FORMATION TIME: 15-30min • SOLVANT FREE • PROFESSIONAL QUALITY

Properties

  • • All Types of (heavy) Panels
  • • Easy to Apply
  • • Moisture and Water Resistant
  • • Tension equalizing
  • • Very good filling capacity
  • • Fast Curing
  • • Solvent Free

Application

Suitable for:

Acoustic panels or decorative panels made of wood, HPL, stone, aluminum composite*, EPS, polyurethane or PVC. Not suitable for PE, PP, PTFE and bitumen

Handling

Before use

Working conditions

Adhesion tests recommended, as the back coating may have different properties depending on the manufacturer.

Tools

Multi- Tool; GRIFFON Multi nozzle - this enables up to 4 beads to be applied simultaneously

During use

Directions For Use

Follow the detailed application instructions in the technical data sheet (->QR-code). Only apply at temperatures above +5 °C. Apply the adhesive in vertical, max. 30 cm long beads at a distance of approx. 10-30 cm to one of the (clean) surfaces, align the panel and press down evenly and firmly

Points of attention

In the case of two non-porous surfaces, apply the adhesive in thin beads, ensuring sufficient spacing and regular interruptions.

After use

Storage conditions

At least 18 months when stored in a closed cartridge in a dry place at temperatures between +5 °C and +25 °C. BBD: see cartridge (MM/YY). The opened cartridge has a limited shelf life

Documents

Similar products