Skip to content

Kolmat® Fibre Seal

EAN: 8710439237510Article No.: 6310694
Impregnated, fibre-reinforced sealing tape.
  • Fibre-reinforced Re-adjustable > 180° Removable Immediately loadable


  • Fibre-reinforced
  • Re-adjustable > 180°
  • Removable
  • Immediately loadable


Suitable for:

For sealing conical and cylindrical metal and plastic threaded connections. Suitable e.g. for (drinking) water, gas, LPG (gas) and (compressed) air. Applicable for e.g. copper, brass, (galvanized) steel, stainless steel, chrome, zinc, PVC, CPVC and ABS. Gas: up to 5 bar pressure at -20°C - +70°C. Water up to 16 bar pressure at +95 °C, up to 7 bar pressure at +130°C.

Not suitable for:

Limited resistant to chemicals. Not suitable for oxygen.


Before use


See table:

During use

Directions For Use

1. Clean and degrease surfaces. Smooth surfaces such as brass, stainless steel and chrome must first be roughened. 2. Apply the dark green side of the tape to the thread, winding tightly and pressing it firmly in the direction of the thread while allowing a 50% overlap. If a 50% overlap is not possible, then apply 2-3 windings and pull tape tight, so that it is pressed into the screw thread. In case of a loose fit, it may be necessary to apply more windings. 3. Assemble joint. Joint is adjustable to at least 180°.

After use

Storage conditions

Stored in unopened packaging between +5°C and +25°C. Best Before Date (MM/YY): see packaging. Close packaging properly after use and store in a dry, cool, and frost-free location.


Approval marks & standards


Similar products