Skip to content

Soldering Wire Tin/Lead 40/60

EAN: 8710439930541Article No.: 1236227
Soldering Wire Tin/Lead 40/60.
  • Tin/Lead 40/60 Solid Ø 3.0 mm Resistant to temperatures up to 90°C

Properties

  • Tin/Lead 40/60
  • Solid
  • Ø 3.0 mm
  • Resistant to temperatures up to 90°C

Application

Suitable for:

For soft soldering all metals (with the exception of aluminium and its alloys) in practically all areas of application.

Not suitable for:

Not suitable for drinking water pipes.

Handling

Before use

Tools

Soldering iron or burner, flux, scouring fibre, pipe cutter, fitting brush, deburrer, Heat-Shield, cloth

During use

Directions For Use

1. Sand joining surfaces well and clean (bare metal) with Griffon scouring fibre. 2. Apply flux evenly with brush to both joining surfaces. Avoid overuse of the flux. 3. Assemble joint. Use only well-fitting parts. Avoid overheating the flux, as this will hamper the flow of the solder. 4. Heat joint evenly and add tin solder. Allow the solder to melt onto the soldered seam and not in the flame or on the iron. Completely fill soldered seam. 5. Remove flux residue with water or a damp cloth. 6. Allow joint to cool in air.

Points of attention

Use Griffon Heat-Shield to protect walls, tiles, wallpaper, paint and plasterwork, for example.

After use

Stains/residue

Remove any remaining flux using water or a damp cloth.

Documents

Similar products