- Gap filling
For joining pipes, sockets and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. With special pipe brush for quick and easy application. Suitable for diameters ≤ 250 mm. Max. 25 bar (PN 25) for diameters ≤ 110 mm. Max. 16 bar (PN 16) for diameters > 110 mm and ≤ 250 mm. Maximal tolerances 0.8 mm diametrical clearance / 0.2 mm press fit. Suitable for e.g. pipe systems conforming to EN 1566, 15877 and ISO 15493 (PVC-C).
Do not use in temperatures ≤ +5°C.
Indication of the number of joints per 1 L:
Directions for use
1. Cut pipes square, chamfer edges and deburr. 2. Clean surfaces with Griffon Cleaner and Cleaner Cloth. 3. Apply adhesive rapidly and evenly all around (4-6x) on both surfaces (pipe thickly, socket thinly). 4. Assemble joint immediately. Remove excess adhesive. Do not load the joint mechanically for the first 10 minutes. Close packaging immediately after use.
Points of attention
Brush size varies per packaging volume. Use a suitable packaging (brush) for the diameter to be bonded.
Remove adhesive stains with Griffon Cleaner and Cleaner Cloth.