Skip to content

Sealing Tape Lead

EAN: 8710439129563Article No.: 6302583
Self-adhesive lead coloured sealing tape based on bitumen for sealing joints, seams and cracks on almost all surfaces, such as stone, concrete, lead, zinc, aluminium, glass, wood and various synthetics. Suitable for indoor and outdoor applications.
  • Water resistant
  • Resistant to all types of weather
  • UV resistant
  • Cold and heat resistant
  • Paintable

Properties

  • Water resistant
  • Resistant to all types of weather
  • UV resistant
  • Cold and heat resistant
  • Paintable

Application

Suitable for:

Suitable for sealing joints, seams and cracks in almost all surfaces, such as stone, concrete, lead, zinc, aluminium, glass, wood and various synthetics. Suitable for internal and external applications, such as drain pipes, ducts, roof covering, corrugated plates, chimneys, window frames, greenhouses and skylights.

Handling

Before use

Working conditions

Do not use in temperatures ≤ +5°C.

Preliminary surface treatment

Surfaces must be dry, clean, and free of dust and grease. Remove loose paint and rust.

Preparation of product

At low temperatures, heat substrate and/or tape with a gas burner or hair dryer.

During use

Directions For Use

Remove the liner and apply the tape without stress. For a good adhesion overlap at least 1.5 cm. In wider joints or cracks apply a number of strips over each other. Overlap the strips in the longitudinal direction at least 3 cm. Please take into account the direction of the water drainage. When using around pipes and tubes, wrap sealing tape evenly around the tube with an overlap of about 1.5 cm. Smooth the sealing strip from the middle along its entire length with a cloth or roller and press firmly. Avoid air bubbles in overlapping strips. If surfaces form an angle with each other than press firmly in the corner.

After use

Storage conditions

Store in well-sealed packaging at temperatures between +5°C and +25°C.

Documents

Similar products