Sealing Tape Aluminium

Roll 10 m x 10 cm

Self-adhesive aluminium coloured sealing tape

Sealing Tape Aluminium



  • Water resistant
  • Resistant to all types of weather
  • UV resistant
  • Cold and heat resistant
  • Paintable
Go to top


Suitable for:

Suitable for sealing joints, seams and cracks in almost all surfaces, such as stone, concrete, lead, zinc, aluminium, glass, wood and various synthetics. Suitable for internal and external applications, such as drain pipes, ducts, roof covering, corrugated plates, chimneys, window frames, greenhouses and skylights.

Go to top


Before use:

Working conditions

Do not use in temperatures ≤ +5°C.

Preliminary surface treatment

Surfaces must be dry, clean, and free of dust and grease. Remove loose paint and rust.

Preparation of product

At low temperatures, heat substrate and/or tape with a gas burner or hair dryer.

During use:

Directions for use

Remove the liner and apply the tape without stress. For a good adhesion overlap at least 1.5 cm. In wider joints or cracks apply a number of strips over each other. Overlap the strips in the longitudinal direction at least 3 cm. Please take into account the direction of the water drainage. When using around pipes and tubes, wrap sealing tape evenly around the tube with an overlap of about 1.5 cm. Smooth the sealing strip from the middle along its entire length with a cloth or roller and press firmly. Avoid air bubbles in overlapping strips. If surfaces form an angle with each other than press firmly in the corner.

After use:

Storage conditions

Store in well-sealed packaging at temperatures between +5°C and +25°C.

Go to top

Related products

Go to top