Sealant Remover

Bottle with brush 250 ml

Paste for removing cured sealant residues.

Sealant Remover


Go to top


Suitable for:

Suitable for removing (cured) sealant residues. Suitable for ceramic tiles, glass, metal, synthetics, laminated material, aluminium and enamel.

Not suitable for:

Not suitable for nylon.

Go to top


Before use:

Working conditions

Only apply at temperatures between +5°C and +40°C.

Surface requirements

The substrate must be properly dry, clean and free of dust and grease. Remove as much of the existing sealant as possible .

Preliminary surface treatment

Use a sharp knife/putty knife to cut away the silicone sealant as much as possible and a dry cloth for the last remaining bits.


GRIFFON Multitool, Sharp box cutter, Cleaning Cloth, Sponge

Preparation of product

Shake well or stir before use.

During use:

Directions for use

Shake closed bottle vigorously for about a minute. Cut old sealant loose with a sharp box cutter/ knife. Use the hook of the ${Brand} Multitool to pull out the old sealant out of the joint. Apply the paste generously onto the old sealant residue. Allow to act for at least 30 minutes. Remove old sealant residues with cleaning cloth or sponge. If necessary, repeat the treatment. Clean the joint thoroughly with a sponge and water. Degrease the surface with a lint-free cloth and ammonia. Let it dry thoroughly. Ready for a new sealant application.


Test the remover on a non-visible spot as staining may occur on sensitive materials.

Points of attention

May cause staining on porous materials and painted surfaces.

After use:

Storage conditions

Store in properly sealed packaging in a dry place at between +5°C and +25°C.

Go to top

Related products

Go to top