Skip to content

Gun PU-Foam

EAN: 8715598505029Article No.: 6150502
Fast curing polyurethane foam for insulating, sealing and filling of seams, joints, gaps, holes and cracks. Use in combination with PU-Foam Gun.
  • Non-shrinking
  • Large filling capacity
  • High insulation value
  • Flammability class B2
  • Paintable
  • Water resistant
  • Chemical resistant
  • CFC and HCFC-free (ozone friendly)

Properties

  • Non-shrinking
  • Large filling capacity
  • High insulation value
  • Flammability class B2
  • Paintable
  • Water resistant
  • Chemical resistant
  • CFC and HCFC-free (ozone friendly)

Application

Suitable for:

Suitable for insulating, sealing and filling of seams, joints, gaps, holes and cracks in wall partitions, window and door frames, roof boards, chimneys, dormers and penetrations of pipes, tubes, cables and power lines. Bonds to many building materials, such as wood, concrete, stone, masonry, plasterwork, metal, glass and many synthetics, including polystyrene, polyester and PVC.

Not suitable for:

Not suitable for bitumen, silicone, polyethylene (PE), polypropylene (PP) and P.T.F.E.

Handling

Before use

Working conditions

Only apply at temperatures between +5°C and +40°C.

Surface requirements

The substrate must be thoroughly clean and free of grease. Slightly moisten dry surfaces.

Tools

PU-Foam Gun

Preparation of product

Shake well before use (10-20 times).

During use

Directions For Use

Mount the aerosol on the PU Foam gun. By pulling the trigger, the foam can be dosed easily and precisely. Hold the can upside down while spraying. Fill the area for about 65%. For filling large volumes apply foam in layers and allow to fully froth. Moisten between each layer. After curing, the foam can be cut, drilled and painted, and, if desired, plastered. After use, clean the gun with GRIFFON PU cleaner.

Personal Safety

Wear gloves and safety goggles and provide adequate ventilation.

After use

Stains/residue

Remove wet stains immediately with GRIFFON PU-Foam Cleaner or acetone. Cured stains can only be removed mechanically.

Storage conditions

Store upright in properly sealed packaging in a dry place between +5°C and +25°C.

Documents

Approval marks & standards

Similar products