- Water resistant
- Resistant to all types of weather
- UV resistant
- Cold and heat resistant
Suitable for sealing joints, seams and cracks in almost all surfaces, such as stone, concrete, lead, zinc, aluminium, glass, wood and various synthetics. Suitable for internal and external applications, such as drain pipes, ducts, roof covering, corrugated plates, chimneys, window frames, greenhouses and skylights.
Do not use in temperatures ≤ +5°C.
Preliminary surface treatment
Surfaces must be dry, clean, and free of dust and grease. Remove loose paint and rust.
Preparation of product
At low temperatures, heat substrate and/or tape with a gas burner or hair dryer.
Directions for use
Remove the liner and apply the tape without stress. For a good adhesion overlap at least 1.5 cm. In wider joints or cracks apply a number of strips over each other. Overlap the strips in the longitudinal direction at least 3 cm. Please take into account the direction of the water drainage. When using around pipes and tubes, wrap sealing tape evenly around the tube with an overlap of about 1.5 cm. Smooth the sealing strip from the middle along its entire length with a cloth or roller and press firmly. Avoid air bubbles in overlapping strips. If surfaces form an angle with each other than press firmly in the corner.
Store in well-sealed packaging at temperatures between +5°C and +25°C.